Home » Product catalog » Capillary Electrophoresis Systems » Portable capillary electrophoresis system Capel-115

Portable capillary electrophoresis system Capel-115

Capel-115 is a portable capillary electrophoresis (CE) system intended for determination of a wide range of analytes in various types of samples, including water, soil, food, and fodders using main modes of separations available in capillary electrophoresis.

principle of operation

High performance capillary electrophoresis is based on the differential migration of components of aqueous samples within a narrow fused silica capillary driven by an electric field. Separated solutes are quantitatively detected at the capillary outlet by a high sensitive optical system based on direct or indirect UV absorbance.

Applications

Petrochemical industry
Environmental analysis
Food and beverages production
Animal feed industry

Features & Advantages

Portable, light, and field deployable
Small footprint
High separation efficiency
Multiple components determination in one run
Suitable for various types of analytes from small ions to macromolecules
Liquid cooling of capillary ensures high reproducibility
Fast analysis (most analyses take 5–15 minutes)
Simple sample pre-treatment (just dilute and filter)
Low analysis cost (nanoliters of reagents, only low-cost consumables are needed)
Power supply unit equipped with a built-in rechargeable battery and AC power cord
IQ/OQ protocols

equipment and options

Capillary electrophoresis system Capel-115
Spare capillary cassette
Elforun software package
Kits & sets for analysis (by request)
Service agreement (by request)

Warranty

All Capel-115 CE systems are covered by a 12-month warranty. The information and specifications in this publication are subject to change without notice.

Services

Installation of Capel-115 CE systems can be carried out at a customer's site by our service engineers.

Detection wavelength	190–400 nm
Analysis	Constant voltage, (+/-) 1-25 kV in 1 kV steps Automatic (electronic) polarity switch Current 0–300 μА Pressure, up to 100 mbar Programmable changing of wavelength, pressure and voltage during analysis
Injection	By voltage, (+/-) 1-25 kV in 1 kV steps; by pressure, from –100 to 100 mbar in 1 mbar steps
Rinsing	By pressure, 500–2000 mbar in 1 mbar steps
Capillary	Length 42-100 cm Internal diameter 50, 75 μm
Temperature control of capillary	From 10 °C below ambient temperature (although not lower than +5 °C in absolute value) to +50 °C in absolute value
Sampler	Autosampler for 10 vials (standard 1.5 mL)
Power requirements	100–240 VAC, 50/60 Hz or built-in battery 15 VDC
Environmental conditions	ambient air temperature, 10 – 35 °C relative air humidity at 30 °C, not more 80 % atmospheric pressure, 84 – 106.7 kPa
Time of continuous operation with built-in battery	5 h
Dimensions / Weight	290х385х460 mm, 15 kg

Portable capillary electrophoresis system Capel-115

Products

Portable capillary electrophoresis system Capel-115